Delta Mobrey 003S2 Ultrasonic Level Switch
The Delta Mobrey Ultrasonic Liquid Level switch with polyphenylene sulphide construction has output type integral SPco relay(energised when the sensor is wet) and 1-in BsPT dual mount thread.This switch is designed for high or low-level alarm duties to give a voltage-free contact or solid-state transistor output for alarmsignalling or as part of a pump control sytem. t is intended for level detection at a fixed point when liquid fills the gap between thecrystals.The supply voltage ranges between 18VAC/DC and 30VAC/DC.
Vessel pressure of5bar(maximum)
Wet switching level detection at a fixed point when liquid fills the gap between the crystals
5witched voltage is 30vDc(maximum)
Suitable for low maintenance applications
High reliability with no moving parts
Not easily subject to fouling and not affected by ambient light conditions
Fitted with three metres of cable
Lightweight
No moving parts
Mounting types are horizontal and vertical
Note: lf the liguid to be monitored is flowing, the device should be fited with the gap inline with the flow. In storage tanks, it shouldbe fitted with the gap vertical unless the liquid is highly aerated when it should be angled.Applications
Low level alarms in header tanks
Pump control duty in feeder tanks
High and low alarms in storage tank
Level and pump control in storage tanks
mall or thin wall tanks
Bund level detection
Steering gear oil