​Filter

Home > Products > ​Filter > Amphenol Procom Duplex Filters DPF 2/6-150 L-1/2-N(f)
Amphenol Procom Duplex Filters DPF 2/6-150 L-1/2-N(f)
[pics:title]

Amphenol Procom Duplex Filters DPF 2/6-150 L-1/2-N(f)

Date: 2025-11-14
Models: DPF 2/6-150
Price: Phone or Email Inquiry

Do you have any questions about this product? Please contact our customer service by phone number +852 30623028 Or Quick Inquiry Form.

Product Overview

The DPF 2/6-150... is a 6-cavity high-power base station duplex filter with a frequency band of 138 - 175 MHz.

There are two basic models of the duplexer:

The DPF 2/6-150 L model can be tuned within the 138 - 156 MHz frequency band, while the DPF 2/6-150 H model can be tuned within the 152 - 175 MHz frequency band, both with a nominal duplex separation of 4.5 MHz.

This type of filter uses enlarged (40 x 40 mm) full quarter-wavelength cavities with silver-plated temperature-compensated resonator elements. The high Q values achievable in these cavities enable the filter to operate with very narrow duplex spacing while maintaining low insertion loss. Additionally, duplex isolation is improved at moderate spacings.

With the increased high-voltage point insulation distance, the enlarged size also enhances the filter's power-handling capacity, and the inevitable power consumption (which always exists, even though insertion loss is kept to a minimum) will be distributed over a larger area. This filter is capable of continuous operation at a power level of 150 W.

The DPF 2/6-150... is primarily used in equipment where Tx and Rx operate on a single frequency, but it can also be used where Tx and Rx operate on multiple channels with slightly reduced data, that is, within a certain port bandwidth. In the latter case, factory adjustment is recommended.

The housing is made of extruded aluminum, the chassis is made of passivated steel, and both the rigid coaxial cables and connectors use polytetrafluoroethylene insulation.

The DPF 2/6-150... is coated with black vinyl to prevent corrosion.


Model: DPF 2/6-150 L-1/2-N(f)

Frequency:

DPF 2/6-150 L: 138 - 156 MHz

Maximum Input Power: 150 W

Special Specification Information:

| | Single-Channel Tuning | Multi-Channel Tuning (Bandwidth = 1.5 MHz) |

| --- | --- | --- |

| Insertion Loss Tx-Ant and Ant-Rx | < 1.2 dB (typical value: 1.0 dB) | < 1.4 dB (typical value: 1.2 dB) |

| Tx Noise Suppression at Rx Frequency | > 80 dB | > 60 dB |

| Isolation of Receive at Frequency of Transmission | > 80 dB | > 60 dB |

| Impedance | 50 Ω | 50 Ω |

| Duplex Spacing | 1 - 10 MHz | 1 - 10 MHz |

| VSWR | ≤ 1.5:1 | ≤ 1.5:1 |


Our order process

Step One

Customer inquiry

Step Two

Cost calculation and quotation preparation

Step Three

Quotation submission to the customer

Step Four

Contract signing and advance payment

Step Five

Product arrival and final payment

Step Six

Shipment to the customer