HT-PD Pressure Sensor HT-PD PR140
Overload Capacity: 1.5× rated pressure
Burst Pressure of HT-PD: 3× rated pressure
Output Signal of HT-PD: 4...20mA (two-wire), 0...10VDC (three-wire)
Power Supply for HT-PD:
When output is 4...20mA: 10...30VDC
When output is 0...10VDC: 12...32VDC
Current Consumption: 6.5mA
Overvoltage Protection: 36VDC
Combined Error: Calculated from non-linearity, repeatability, hysteresis, and zero drift
At 22°C room temperature: ±0.5%
At -15°C...+85°C: <±1%
At +85°C...+100°C: <±2.5%
At -40°C...-15°C: <±2.5%
Compensation Temperature Range: -40°C...+100°C
Non-linearity: <±0.4% (of actual value)
Repeatability: <±0.1% (of actual value)
Hysteresis: <±0.1% (of actual value)
Long-term Stability: <±0.1% (of actual value)/year
Response Time of HT-PD: ≤1ms (10...90%)
Frequency Range of HT-PD: ≤1KHz
Insulation Performance of HT-PD: ≥100MΩ
Current Output Load Capacity: RG=(Ub-10V)/0.02A (for 4～20mA)
Voltage Output Load Capacity: RL≥5KΩ (for 0～10VDC)
Fatigue Life: >10⁷ cycles
Medium Temperature of HT-PD: -40°C...+100°C (short-term up to +120°C)
Ambient Temperature of HT-PD: -40°C...+85°C
Storage Temperature of HT-PD: -10°C...+70°C
Electromagnetic Interference (EMV) Test: Meets standards EN 50081-2, EN 50082-2
Vibration Resistance: 5 mm 10...32 Hz, 20 g 32...500 Hz, DIN EN 60068-2-6
Shock Resistance of HT-PD: 50g (11ms half-sine wave)
Electrical Connection of HT-PD: 4-pin socket, DIN EN 175301-803
Mechanical Interface of HT-PD: ISO228-G1/4A
Sealing Material: DIN 3869 face seal ring, fluororubber
Protection Class: IP65
Housing Material: 304
Diaphragm Material: 316Ti
Tightening Torque: 40Nm (±5 Nm)
Weight: ~97 g