Allen-Bradley 1734-OE4C Module
It is an analog output module of the Point I/O series of Rockwell Automation, designed for industrial automation control. The module provides 4 single-ended non-isolated current output channels, supports the conversion of digital signals into analog signals, and is widely used in scenarios where precise control of analog output is required.
Main technical parameters
Brand and model: Allen-Bradley 1734-OE4C
Module type: Analog output module
Output channels: 4 single-ended non-isolated current outputs
Output signal range:
Default range: 4-20 mA
Optional range: 0-20 mA
Resolution: 16 bits (0.32 μA/cnt)
Output accuracy:
0.1% of full scale (at 77°F / 25°C)
Output conversion rate: Up to 1 μs
Power supply voltage: 24 V DC (nominal value, range 10-28.8 V DC)
Power consumption:
When each channel is loaded with 0 ohms: 2.15 W
When each channel is loaded with 750 ohms: 1.86 W
Heat dissipation:
When each channel is loaded with 0 ohms: 7.33 BTU/hour
When each channel is loaded with 750 ohms: 6.34 BTU/hour
Protection level: IP20
Mounting method: DIN Rail mount
Compatibility:
Supports CompactLogix and ControlLogix controllers
Supports EtherNet/IP and DeviceNet networks