Detailed Specification Parameter Table for T224148
Parameter Category Specification Description
Product Model T224148
Equipment Type Safety Temperature Limiting Device
Temperature Measurement Range 0...200 °C
Rated Supply Voltage AC 230 V
Supply Voltage Tolerance -10% ... +10%
Power Consumption < 2 VA
Supply Frequency 50/60 Hz
Sensor Type Pt100 (2-wire), conforming to EN 60751/IEC 751
Setting Method Front-end potentiometer adjustment, sealable to prevent tampering
Switching Hysteresis Approximately 10°C
Reset Method Built-in reset button or external reset terminal
Output Contacts 1 changeover contact, safely connected in series by two internal relays
Maximum Switching Voltage AC 400 V
Maximum Switching Current 6 A
Maximum Switching Power 2000 VA (resistive load)
Rated Continuous Current 6 A
Safety and Certification Conforms to Safety Category 3 (EN 954-1), SIL 2 (IEC 61508), PL c
Certified by TÜV Rheinland
Fault Diagnosis Sensor break and short-circuit monitoring, dual-channel fault detection
Status Indication LED indicators: relay status, fault, readiness
Installation Method Plug-in base, can be clipped onto a 35mm standard rail
Enclosure Protection Rating IP40 (enclosure) / IP20 (terminals)
Ambient Temperature 0...50 °C
Dimensions (H x W x D) 82 x 42 x 121 mm