STWA1H Current Transformer
Part Number: S225506
Purpose: Used for detecting alternating current, it can be used independently or connected to an STW current monitor.
Installation Method:
Mountable on a 35 mm DIN rail
Or fixed using 2 screws
Connection Method: Pluggable terminals
Cable Routing Method: Pass the cable vertically through the transformer (at a right angle to the rail), with a bore diameter of 11 mm.
Built-in LED:
Lights up when the current exceeds approximately 2 A.
Incorporates a built-in protective resistor to prevent LED overload.
Can display short-term current pulses.
Independent Use: Can be used without connecting to a current monitor, solely for current visualization.